1. Compliant with SFF-8431 and IEE802.3ae
2. Suitable for use in 100GHz channel spacing DWDM systems
3. Data rate selectable ¡Ü4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
4. Cooled EML transmitter and PIN receiver
5. link length up to 40km
6. Low Power Dissipation 1.5W Maximum
7. Operating Case Temperature:Standard :  0 to +70¡ãC / Industrial : -40 to +85¡ãC 
8. Single 3.3V power supply
9. Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
10. RoHS compliant and lead free

F-tone tunable SFP+ transceiver is fully compliant to SFP+ MSA. It supports 50GHz DWDM 10Gb/s SONET/SDH, 10 Gigabit Ethernet, and 10 Gigabit Fibre Channel applications over fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the SFP+ MSA and SFF 8472 MSA.

Compliant with Small Form Pluggable (SFP) Multi Source Agreement (MSA) mechanical and electrical specifications for LC Duplex transceivers, ANSI Fibre Channel transceiver for FC-PI-5 and FC-PI-2 gigabit applications.

F-tone BIDI SFP+ transceivers are designed for bi-directional 10G serial optical data communications such as IEEE 802.3ae 10GBASE-BX by using 1330(1270nm) transmitter and 1270(1330) nm receiver. The transceiver consists of two sections: The transmitter section uses a multiple quantum well 1330(1270) nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1270(1330) nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

F-tone SFP+ direct attach copper cable assemblies provide a cost-effective solution over fiber optics in short reach applications. The design allows for serial data transmission up to 10Gbps in each direction.  Low power consumption helps make the SFP+ copper cable assembly an economical solution for within rack or rack-to-rack applications.

F-tone SFP+ transceiver are multi-purpose optical modules for 10Gbit/s data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000 Base-SX Ethernet.