+86-028-85255257
F-tone¡¯sFLTR-8502H-05X series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 52 Mbps. These modules are fully compliant with the Multi-sourced 1¡Á9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 52 Mbps rate for fiber communications.Commerce level transceiver module which operating at 0¡æ to 70¡æ.
¡ª 0¡ãC to +70¡ãC
¡ª -40¡ãC to +85¡ãC for industry level
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It¡¯s not implied that the product would function above the recommended operating environment, it¡¯s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
Parameter |
Symbol |
Min |
Max |
Units |
Storage Temperature |
TST |
-40 |
+85 |
¡æ |
Operating Temperature |
TOP |
0 |
+70 |
¡æ |
Supply Voltage |
VCC |
0 |
+6 |
V |
Relative Humidity |
RH |
5 |
95 |
% |
Lead Soldering Temperature & Time |
- |
- |
260/10 |
¡æ/S |
Table 2-- Recommended Operating Environment
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Supply Voltage |
VCC |
4.75 |
5.0 |
5.25 |
V |
Ambient operating Temperature |
TOP |
0 |
- |
+70 |
¡æ |
Supply Current |
ITX+IRX |
- |
100 |
150 |
mA |
Table 3 FLTR-8502H-05X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, VCC =4.75V to 5.25V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Data rate |
B |
- |
- |
52 |
Mb/s |
Output Center Wavelength |
¦ËC |
830 |
850 |
860 |
nm |
Output Spectral width (RMS) |
¦Ë |
- |
- |
0.85 |
nm |
Average Optical Output Power |
PO |
-15 |
-8 |
-5 |
dBm |
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
Receiver |
|||||
Receiver Sensitivity |
PMIN |
- |
- |
-30 |
dBm |
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
Signal Detect -- Asserted |
PA |
- |
- |
-30 |
dBm |
Signal Detect -- Deasserted |
PD |
-42 |
- |
- |
dBm |
Signal Detect - Hysteresis |
PHYS |
1.0 |
- |
4.0 |
dB |
Table 4 (Ambient Operating Temperature Ta=0¡ãC to +70¡ãC, VCC = 4.75V to 5.25V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Power Supply Current |
ICC |
- |
- |
50 |
mA |
Data Input Current - Low |
IIL |
-350 |
- |
- |
¦ÌA |
Data Input Current - High |
IIL |
- |
- |
350 |
¦ÌA |
Data Input Voltage - Low |
VIL |
- |
- |
0.7 |
V |
Data Input Voltage - High |
VIH |
2.0 |
- |
- |
V |
Receiver |
|||||
Power Supply Current |
ICC |
- |
- |
100 |
mA |
Data Output Voltage ¨C Low |
VOL |
- |
- |
0.7 |
V |
Data Output Voltage ¨C High |
VOH |
2.0 |
- |
- |
V |
Signal Detect Output Voltage-Low |
VOL |
- |
- |
0.7 |
V |
Signal Detect Output Voltage-High |
VOH |
2.0 |
- |
V |
Table 5 Connector pin assignment
Pin # |
Pin Name |
Description |
1 |
Rx VEE |
Receiver Signal Ground |
2 |
RD+ |
Receiver Data Out |
3 |
N/C |
N/C |
4 |
SD |
Signal Detect |
5 |
Rx VCC |
Receiver Power Supply |
6 |
Tx VCC |
Transmitter Power Supply |
7 |
N/C |
N/C |
8 |
TD+ |
Transmitter Data In |
9 |
Tx VEE |
Transmitter Ground |
Table 1: Order Information
FLTR-8502H-05 |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,SC, 0¡ãC to +70¡ãC |
FLTR-8502H-05I |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,SC, -40¡ãC to +85¡ãC |
FLTR-8502H-05F |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,FC, 0¡ãC to +70¡ãC |
FLTR-8502H-05FI |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,FC, -40¡ãC to +85¡ãC |
FLTR-8502H-05T |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,ST, 0¡ãC to +70¡ãC |
FLTR-8502H-05TI |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,ST, -40¡ãC to +85¡ãC |
Note: Specifications subject to change without notice.