Description
Features |
Applications |
|
Low Excess Loss
Various Splitting Ratio
Wide Passband
High Stability and Reliability
Epoxy Free Optical Path
|
Optical Amplifier
Optical Networks
Power Monitoring
Fiber Sensor
Lab
|
Specifications
Parameter
|
Unit
|
Value
|
Working Wavelength
|
nm
|
850, 1300
|
Attenuation Range
|
dB
|
1.0~30
|
Resolution (<10dB attenuation)
|
dB
|
0.3
|
Optical Return Loss
|
dB
|
≥30
|
Fiber Type
|
-
|
50/125um or 62.5/125umMM Fiber
50/125um MM OM3Fiber
105/125um MM Fiber
|
Fiber Tensile Load
|
N
|
5
|
Max. Optical Power (CW)
|
mW
|
300
|
Operating Temperature
|
°C
|
0~70
|
Storage Temperature
|
°C
|
-40~85
|
Note:
1. Specifications are for device without connectors; Specifications may change without notice.
2. To add connectors, IL is 0.3dB higher, RL is 10dB lower.
3. Specifications are tested at low order modes.
4. Devices with other wavelength range are also available per request.
5. Devices for higher optical power or with other type fiber or consigned fiber are also available.
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.